Datalogic Scanning 7000 manual Data Format Editor, Data Formatter Off

Data Format Editor Introduction

ED Check to make sure there is a non-numeric ASCII character at the current cursor position. If character is numeric, format is aborted. Syntax = ED.

Data Format Editor

Enter Data Format

* Default Data Format

Clear One Data Format

Clear All Data Formats

Save

Discard

Data Formatter

When Data Formatter is turned off, the bar code data is output to the host as read (including prefixes and suffixes). Choose one of the follow- ing options. Default = Data Formatter On, but Not Required.

*Data Formatter On, but Not Required

Data Formatter Off

When Data Formatter is required, all input data must conform to an edited format or the imager does not transmit the input data to the host device.

Data Format On, Format Required

Product Reference Guide 5-5