Datalogic Scanning 7000 manual Micr E13 B Font, Micr E 13 B On, Semi Font On, All OCR Off

OCR Programming

MICR E13 B Font

MICR E13 B On allows you to scan MICR characters on a bank check. The default setting allows you to scan any eight digit combination. If you have created an OCR template, character combinations that fit the template can be scanned (see Creating an OCR Template on page 8-5).

MICR E 13 B On

TOAD characters (Transit, On Us, Amount and Dash) are output in the following manner:

The Transit character is output as T

The On Us character is output as O

NOTE

The Amount character is output as A The Dash character is output as D

SEMI Font

SEMI Font On allows you to scan the SEMI font used in the semiconduc- tor industry.

SEMI Font On

All OCR Off turns off all OCR capability in the imager, so the imager will be able to scan linear, stacked, matrix, and composite bar codes, but not OCR fonts. However, any OCR templates you have created will be retained in memory.

*All OCR Off

8-4 PowerScan® 7000 2D