Datalogic Scanning 7000 AIM Telepen Output Original Telepen Output, Telepen Message Length

Symbologies

Telepen

On

* Off

Telepen Output

Using AIM Telepen Output, the imager reads symbols with start/stop pattern 1 and decodes them as standard full ASCII (start/stop pattern 1). When Original Telepen Output is selected, the imager reads symbols with start/stop pattern 1 and decodes them as compressed numeric with optional full ASCII (start/stop pattern 2). Default = AIM Telepen Out- put.

* AIM Telepen Output

Original Telepen Output

Telepen Message Length

Scan the bar codes below to change the message length. Refer to Mes- sage Length Description on page 6-2 for additional information. Mini- mum and Maximum lengths = 1-60. Minimum Default = 1, Maximum Default = 60.

Minimum Message Length

Maximum Message Length

6-18 PowerScan® 7000 2D