Datalogic Scanning 7000 manual Enter Sequence Default Sequence, Required On/Not Required Off

Output Sequence Overview

Output Sequence Editor

Enter Sequence

Default Sequence

Require Output Sequence

When an output sequence is Required, all output data must conform to an edited sequence or the imager will not transmit the output data to the host device. When it’s On/Not Required, the imager will attempt to get the output data to conform to an edited sequence, but if it cannot, the imager transmits all output data to the host device as is.

When the output sequence is Off, the bar code data is output to the host as the imager decodes it.

This selection is unavailable when the Multiple

Symbols Selection is turned on.

NOTE

Required

On/Not Required

*Off

Product Reference Guide 3-21