Datalogic Scanning 7000 manual User-Specified Double Read Timeout, Hands Free Time-Out

Double Read Timeout

Scan the Hands Free Time-Outbar code, then scan the time-out duration (from 0-300,000 milliseconds) from the Programming Chart on page B-5, and Save. Default = 5,000 ms.

Hands Free Time-Out

Double Read Timeout

This sets the time period before the imager can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental rereads at POS (point of sale). Use shorter delays in applications where repetitive bar code scanning is required. Default = Medium.

Reread Delay only works when in Presentation Mode (see Presentation Mode on page 3-7).

Short (500 ms)

* Medium (750 ms)

Long (1000 ms)

Extra Long (2000 ms)

User-Specified Double Read Timeout

If you want to set your own length for the reread delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) by scanning dig- its from the Programming Chart on page B-5, then scanning Save.

User-Specified Double Read Timeout

Product Reference Guide 3-9