Datalogic Scanning 7000 manual Codabar Concatenation

Symbologies

When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar bar codes printed with a check character, but will not transmit the check character with the scanned data.

* No Check Character

Validate Modulo 16, but

Don’t Transmit

Validate Modulo 16

and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatena- tion, the imager looks for a Codabar symbol having a “D” start character, adjacent to a symbol having a “D” stop character. In this case the two messages are concatenated into one with the “D” characters omitted. Default = On.

Character	Start	Stop	Start	Stop
Codabar
	A12D		D34A

Select Require to prevent the imager from decoding a single “D” Coda- bar symbol without its companion. This selection has no effect on Cod- abar symbols without Stop/Start D characters.

On

* Off

Require

6-4 PowerScan® 7000 2D