Datalogic Scanning 7000 manual Test Menu, 2D PQA Print Quality Assessment

Utilities

Resetting the Standard Product Defaults

If you aren’t sure what programming options are in your imager, or you’ve changed some options and want the standard product default set- tings restored, scan the Standard Product Default Settings bar code below.

Standard Product Default Settings

Menu Commands on page 10-6lists the standard product default settings for each of the commands (indicated by an asterisk (*) on the program- ming pages).

Test Menu

When you scan the Test Menu On code, then scan a programming code in this manual, the imager displays the content of a programming code. The programming function will still occur, but in addition, the content of that programming code is output to the terminal.

This feature should not be used during normal imager operation.

NOTE

On

* Off

2D PQA (Print Quality Assessment)

Two-dimensional Print Quality Assessment (2D PQA) is a feature of the imager where the data from the successful read of a 2D bar code symbol is augmented with lines of text that both identify the symbol, and also report graded measurement parameters obtained from it.

9-2 PowerScan® 7000 2D