Datalogic Scanning 7000 manual Scan Stand Mode, Presentation Mode, Scan Stand Symbol

Scan Stand Mode

Scan Stand Mode

When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan Stand symbol. (See Scan Stand Symbol that follows.) When a dif- ferent code is presented, the Imager is triggered to read the new code.

Note:The imager automatically adjusts the illumination LEDs to the lowest light level possible to maintain a good lock on the Scan Stand symbol. When a symbol is presented, the imager’s light levels adjust to the saved setting (see LED Power Level on page 3-10).

Scan Stand Mode

Scan Stand Symbol

When a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbol on the base of the stand which tells it to remain idle. When the Scan Stand symbol is covered, the imager turns the LEDs on at the con- figured power level (Default High) and attempts to find and decode bar codes in its field of view.

Scan Stand Symbol

Presentation Mode

This programs the imager to work in Presentation Mode.

Presentation Mode

Product Reference Guide 3-7