Datalogic Scanning 7000 Default All Code 93 Settings, Code 93 Enable, Code 93 Message Length

Linear Symbologies

Code 93

< Default All Code 93 Settings >

Code 93 Enable

* On

Off

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to Mes- sage Length Description on page 6-2 for additional information. Mini- mum and Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.

Minimum Message Length

Maximum Message Length

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data received does not display with the proper characters, it may be because the bar code being scanned was created using a code page that is different from the one the host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar codes were created (see Code Page Mapping of Printed Bar Codes on page A-7) and scan the value and the Save bar code from the Programming Chart on page B-5of this manual. The data characters should then appear prop- erly.

Code 93 Code Page

Product Reference Guide 6-11