Datalogic Scanning 7000 manual Codabar Enable, Codabar Start/Stop Characters

Linear Symbologies

Codabar

<Default All Codabar Settings>

Codabar Enable

* On

Off

Codabar Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/Stop characters. Default = Don’t Transmit.

Transmit

* Don’t Transmit

Codabar Check Character

Codabar check characters are created using different “modulos.” You can program the imager to read only Codabar bar codes with Modulo 16 check characters. Default = No Check Character.

No Check Character indicates that the imager reads and transmits bar code data with or without a check character.

When Check Character is set to Validate and Transmit, the imager will only read Codabar bar codes printed with a check character, and will transmit this character at the end of the scanned data.

Product Reference Guide 6-3