Dell HR675 owner manual E1414, Thermtrip, E1418, Presence, E141C CPU Mismatch

Table 1-5. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1414	CPU #	Specified microprocessor is	See "Troubleshooting
	Thermtrip	out of acceptable	System Cooling
		temperature range and has	Problems" on page 145. If
		halted operation.	the problem persists,
			ensure that the
			microprocessor heat sinks
			are properly installed (see
			"Troubleshooting the
			Microprocessor" on
			page 161).
			NOTE: The LCD continues
			to display this message
			until the system’s power
			cord is disconnected and
			reconnected to the AC
			power source, or the SEL is
			cleared using either Server
			Assistant or the BMC
			Management Utility. See
			the Dell OpenManage™
			Baseboard Management
			Controller User’s Guide for
			information about these
			utilities.
E1418	CPU #	Specified processor is	See "Troubleshooting the
	Presence	missing or bad, and the	Microprocessor" on
		system is in an unsupported	page 161.
		configuration.
E141C	CPU Mismatch	Processors are in an	Ensure that your
		unsupported configuration.	processors match and
			conform to the type
			described in the
			Microprocessor Technical

Specifications outlined in your system’s Getting Started Guide.

22

About Your System