Dell HR675 owner manual 105

3Open the expansion card cover (see Figure 3-7).

4Locate the USB connector on the system board (see Figure 6-1).

5Insert the USB memory key into the USB connector onto the board (see Figure 3-23).

6Close the expansion card cover (see Figure 3-7).

7Replace the system cover (see "Installing the System Cover" on page 67).

8Reattach any peripherals you disconnected, then connect the system to the electrical outlet.

9Turn on the system and attached peripherals.

10Enter the System Setup program and verify that the USB key has been detected by the system (see "Using the System Setup Program" on page 41).

Figure 3-23. Installing an Internal USB Key

1

2

1 USB memory key 2 internal USB connector

Installing System Components

105