Dell HR675 owner manual Serial Communication Screen

Table 2-6. Integrated Devices Screen Options (continued)

Option	Description
I/OAT DMA Engine	Enables the I/O Acceleration Technology (I/OAT) option.
(Disabled default)	This feature should be enabled only if the hardware and
	software support I/OAT. The I/OAT Data Memory
	Tranfer (DMA) Engine transfers data between memory
	modules, allowing data to bypass the CPU. I/OAT will be
	supported on the NICs.
System Interrupt	Controls the interrupt assignment of PCI devices in the
Assignment (Standard)	system. When set to distributed, the interrupt routing
	will be swizzled to minimize IRQ sharing.

Serial Communication Screen

Table 2-7 lists the options and descriptions for the information fields that appear on the Serial Communication screen.

Table 2-7. Serial Communication Screen Options

Option	Description
Serial Communication	Options are On without Console Redirection, On with
(On without Console	Console Redirection via COM1, On with Console
Redirection default)	Redirection via COM2, and Off.
External Serial Connector	Specifies whether COM1, COM2, or Remote Access
(COM1 default)	Device has access to the external serial connector for
	serial communications.
Failsafe Baud Rate	Displays the failsafe baud rate used for console
(115200 default)	redirection when the baud rate cannot be negotiated
	automatically with the remote terminal. This rate
	should not be adjusted.
Remote Terminal Type	Select either VT 100/VT 220 or ANSI.
(VT 100/VT 220 default)
Redirection After Boot	Enables or disables BIOS console redirection after your
(Enabled default)	system boots to the operating system.

Using the System Setup Program

49