Dell HR675 owner manual Front Bezel Inserts, Removing a Front Bezel Insert

Front Bezel Inserts

Removing a Front Bezel Insert

NOTE: Before installing a drive in one or more of the front drive bays, first remove the corresponding insert(s) on the front bezel.

NOTE: Bezel inserts may contain screws on the inside. You can attach the screws to new drives, as needed.

1Remove the front bezel (see "Removing the Front Bezel" on page 63).

2Press inward on one of the insert tabs, then pull the insert away from the bezel from the back of the bezel. See Figure 3-4.

Figure 3-4. Removing and Installing the Front Bezel Insert

1

2

3 5

4

1	front bezel	2	front bezel insert
3	tab notch	4	insert tab
5	screws

Installing System Components

65