Dell HR675 owner manual LCD Status Messages, NIC Indicator Codes

Table 1-4.	NIC Indicator Codes
Indicator		Indicator Code
Link and activity		The NIC is not connected to the network.
indicators are off
Link indicator is green		The NIC is connected to a valid link partner on the
		network.
Activity indicator is		Network data is being sent or received.
amber blinking

LCD Status Messages

The system's control panel LCD provides status messages to signify when the system is operating correctly or when the system needs attention.

The LCD lights blue to indicate a normal operating condition, and lights amber to indicate an error condition. The LCD scrolls a message that includes a status code followed by descriptive text. Table 1-5 lists the LCD status messages that can occur and the probable cause for each message. The LCD messages refer to events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation.

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

NOTE: If your system fails to boot, press the System ID button for at least five seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 175.

About Your System

19