3Squeeze the tabs on the hard drive carrier release handle, then rotate the handle down to release the drive.

4Slide the hard drive out of the system.

NOTICE: To maintain proper system cooling and EMI protection, all empty hard drive bays must have a drive carrier or blank installed.

NOTE: If you are not replacing the hard drive, remove the drive from the drive carrier (see Figure 3-12) and insert the empty carrier back into the drive bay.

Figure 3-11. Removing and Installing a Hot-Pluggable Hard Drive

2

13

1

hard drive carrier handle

2

hard drive bays (4)

3 tabs

Installing a Hot-Pluggable Hard Drive

NOTICE: It is recommended that you use only hard drives that have been tested and approved for use with the SAS/SATA backplane.

NOTICE: Not all operating systems support hot-pluggable hard drive installation. See the documentation supplied with your operating system for more information.

78

Installing System Components

Page 78
Image 78
Dell HR675 owner manual Installing a Hot-Pluggable Hard Drive, Tabs