3Disconnect the data cable and the power cable from the hard drive in the drive bay.

4Press in on the blue tabs on each side of the hard drive bracket and slide the drive up and out of the bay.

Figure 3-13. Removing and Installing a Cabled Hard Drive

23

1

4

1

hard drive

2

data cable

3

power cable

4

blue tabs (2)

NOTE: If you are not replacing the hard drive, remove the drive from the drive bracket (see Figure 3-14) and insert the empty bracket back into the drive bay.

5Replace the system cover (see "Installing the System Cover" on page 67).

Installing System Components

81

Page 81
Image 81
Dell HR675 owner manual Blue tabs