Dell R805 manual See Getting Help, See Troubleshooting System Cooling Problems

E1227	Linear PwrGd	Linear voltage regulator(s) has failed. Represents	See Getting Help.
		status of multiple voltage regulators used in the
		video and LOM circuitry.
E1229	CPU # VCORE	Processor # VCORE voltage regulator has failed.	See Getting Help.
E122A	CPU VTT PwrGd	Processor # VTT voltage has exceeded the	See Getting Help.
		allowable voltage range
E122D	CPU # VDDIO	Processor # VDDIO voltage has exceeded the	See Getting Help.
		allowable voltage range
	1.0V PwrGd
E122E	CPU # VDDA	Processor # VDDA voltage has exceeded the	See Getting Help.
		allowable voltage range
E122F	2.5V PwrGd	2.5V voltage regulator has failed.	See Getting Help.
E1231	1.2V HTCORE PwrGd	1.2V HTCORE voltage regulator has failed.	See Getting Help.
E1232	VDD 12V PS# PwrGd	The specified power supply has failed or has been	If removed, reinsert the power supply into the bay and reconnect to power.
		removed from the bay while the system was on.	For component failures, see Getting Help.
E123B	LOM Mezz PwrGd	Voltage regulator for the LOM daughter card has	Recycle power to the system or clear the SEL. If the problem persists, see
		failed.	Getting Help.
E123C	Planar LOM PwrGd	Voltage regulator for the integrated LOM has	Recycle power to the system or clear the SEL. If the problem persists, see
		failed.	Getting Help.
E1310	RPM Fan ##	RPM of specified cooling fan is out of acceptable	See Troubleshooting System Cooling Problems.
		operating range.
E1313	Fan Redundancy	The system is no longer fan-redundant. Another	Check control panel LCD for additional scrolling messages. See
		fan failure will put the system at risk of over-	Troubleshooting System Cooling Problems.
		heating.
E1414	CPU # Thermtrip	Specified microprocessor is out of acceptable	See Troubleshooting System Cooling Problems. If the problem persists,
		temperature range and has halted operation.	ensure that the microprocessor heat sinks are properly installed. See
			Troubleshooting the Microprocessors.
			NOTE: The LCD continues to display this message until the system's power
			cord is disconnected and reconnected to the AC power source, or the SEL is
			cleared using either Server Assistant or the BMC Management Utility. See
			the Dell OpenManage™ Baseboard Management Controller User's Guide for
			information about these utilities.
E1418	CPU # Presence	Specified processor is missing or bad, and the	See Troubleshooting the Microprocessors.
		system is in an unsupported configuration.
E141C	CPU Mismatch	Processors are in a configuration unsupported by	Ensure that your processors match and conform to the type described in
		Dell.	the Microprocessor Technical Specifications outlined in your system's Getting
			Started Guide.
E141F	CPU Protocol	The system BIOS has reported a processor	See Getting Help.
		protocol error.
E1421	CPU Init	The system BIOS has reported a processor	See Getting Help.
		initialization error.
E1422	CPU Machine Chk	The system BIOS has reported a machine check	See Getting Help.
		error.
E1610	PS # Missing	No power is available from the specified power	See Troubleshooting Power Supplies.
		supply; specified power supply is improperly
		installed or faulty.
E1614	PS # Status	No power is available from the specified power	See Troubleshooting Power Supplies.
		supply; specified power supply is improperly
		installed or faulty.
E1618	PS # Predictive	Power supply voltage is out of acceptable range;	See Troubleshooting Power Supplies.
		specified power supply is improperly installed or
		faulty.
E161C	PS # Input Lost	Power source for specified power supply is	Check the AC power source for the specified power supply. If the problem
		unavailable, or out of acceptable range.	persists, see Troubleshooting Power Supplies.
E1620	PS # Input Range	Power source for specified power supply is	Check the AC power source for the specified power supply. If the problem
		unavailable, or out of acceptable range.	persists, see Troubleshooting Power Supplies.
E1624	PS Redundancy	The power supply subsystem is no longer	See Troubleshooting Power Supplies.
		redundant. If the last supply fails, the system will
		go down.
E1625	PS AC Current	Power source is out of acceptable range.	Check the AC power source.
E1710	I/O Channel Chk	The system BIOS has reported an I/O channel	See Getting Help.
		check.
E1711	PCI PERR B## D##	The system BIOS has reported a PCI parity error	Remove and reseat the PCIe expansion cards. If the problem persists, see
	F##	on a component that resides in PCI configuration	Troubleshooting Expansion Cards.
		space at bus ##, device ##, function ##.
	PCI PERR Slot #	The system BIOS has reported a PCI parity error	Reinstall the expansion-card riser. See Expansion-Card Risers.
		on a component that resides in the specified PCIe
		slot.	If the problem persists, the riser card or system board is faulty. See Getting
			Help.
E1712	PCI SERR B## D##	The system BIOS has reported a PCI system error	Remove and reseat the PCIe expansion cards. If the problem persists, see
	F##	on a component that resides in PCI configuration	Troubleshooting Expansion Cards.
		space at bus ##, device ##, function ##.
	PCI SERR Slot #	The system BIOS has reported a PCI system error	Reinstall the expansion-card riser. See Expansion-Card Risers.