DirecTV DVR40, DVR120 manual Caring for your Directv DVR

Models: DVR40 DVR120

1 174
Download 174 pages 22.19 Kb
Page 14
Image 14

C h a p t e r 1

C o n n e c t i n g

 

 

 

For information on how to switch between watching antenna or

cable channels and watching DIRECTV channels, see the connection example in Chapter 2 that is most appropriate to your configuration.

The DVR does not have an on/off switch. To turn the DVR on, plug it

in. The DVR, like a clock or a refrigerator, is designed for constant use and does not need to be turned off. If you must turn it off—for example, to move it—simply unplug it. (The DVR does have an optional standby mode, explained on page 55.)

Be sure to read the safety instructions on page 148.

If you currently own a Dual LNB satellite dish antenna that is already connected to two TVs, you can purchase a multiswitch (described on page 6) that will allow you to connect two cables to your new DVR as well as one to an existing receiver for your second TV.

Using an Antenna or Cable Connection, in Addition to DIRECTV® Programming

If you have an antenna or cable connection in addition to your satellite dish antenna, you can watch antenna or cable channels while recording DIRECTV® channels. However, recording and other features (such as parental controls, purchasing pay per view programs, viewing on-screen menus, or pausing live TV), do not work on cable or antenna channels.

Caring for your DIRECTV DVR

Do not drop. Your new DVR contains a hard disk drive that is constantly in motion; it may be damaged if the DVR falls or is dropped. Place the DVR in a stable location.

Unplug before moving. To prevent damage to sensitive components such as the hard disk drive, always unplug your DVR and then wait a moment for the hard disk to stop spinning before moving it.

Do not stack. Your DVR is NOT designed to carry the weight of other consumer components such as VCRs, DVD players, or A/V receivers.

Flat, hard surface. The DVR should rest on a flat, hard surface only. Do not operate it on a carpet or other padded surface, as this can inhibit proper ventilation and cause the unit to overheat.

Use a surge protector. Like all electronics equipment, your DVR can be damaged by fluctuations in your power supply. Purchasing a surge protector is highly recommended. If you purchase a surge protector that allows you to plug in both your DVR’s power and your telephone cord, you may prevent damage to the parts of your DVR that are connected to your phone line as well!

4

Page 14
Image 14
DirecTV DVR40, DVR120 manual Caring for your Directv DVR