Energizer MMT-511 manual Selftest

12.Select YES and press ACT to verify insulin type. To change the insulin type, select NO and press ACT, or press ESC to return the INSULIN TYPE screen.

MiniMed

VERIFY INSULIN TYPE

No U100u

Yes

The factory setting for insulin concentration is U100u. U50u insu- lin is currently not approved for pump use in the United States.

MiniMed

MANUAL PRIME

Disconnect from Body

Insert/Lock Reservoir

HOLD ACT to Prime

13.Insert the reservoir into the pump as described in Chapter 2, Getting Started.

Selftest

Selftest is a safety feature used to make sure your pump is operat- ing properly. This self-diagnostic feature can be used for mainte- nance or to check your pump if it is operating in an unusual manner. During selftest, your pump will automatically run a series of internal tests, including checking the proper operation of the beep and vibrate modes.

The pump also routinely performs a series of independent tests to ensure that it is operating properly.

Utilities 103