
16.Fill the reservoir with your insulin. Refer to the Instructions for Use provided with the reservoir.
WARNING: Your pump will not accurately deliver insulin if air bubbles are present in the reservoir or infusion set. Take care to remove air bubbles when filling your reservoir and priming your infusion set.
17.Attach the tubing connector to the top of the filled reservoir as described in the instructions that came with the reservoir.
18.Once the tubing connector is securely in place, insert the reser- voir into the top of the pump case.
19.Once the reservoir is inserted, rotate the tubing connector approxi- mately 1/2 turn clockwise until seated. When seated, the tubing connec- tor should be aligned horizontally as shown in graphic.
battery cap
tubing
connector
ESC
ACT
20.Make sure the following screen is showing on the pump. Press ACT if the screen is not visible.


MiniMed 


MANUAL PRIME
Disconnect from Body
Insert/Lock Reservoir
Hold ACT to Prime
26Chapter 2