3.To resume basal delivery, press and hold ACT to “wake up” the pump. Press the S button, then press ACT. The pump will beep/vibrate once and then will resume basal delivery.

Installing a new remote battery

The battery in the remote control needs to be changed approxi- mately every six months, depending on how often you use the remote.

1.Unsnap the rear panel by twisting a coin or screwdriver between the key ring. Remove the used battery and discard properly.

2.Insert a new A23 battery

according to the diagram

battery

on the remote control

 

case. When inserting the

key ring

new battery, do not touch

 

any of the exposed elec-

 

tronics.

 

3.Replace the rear panel

and snap the panels together to connect remote control case.

Your remote control should be able to transmit to the pump as soon as the battery is inserted. If this does not happen:

1.Check to see if the battery is inserted properly.

2.If the battery is inserted properly and the remote control green light does not flash, install a new battery.

If the remote control does not “wake up” the pump:

1.Make sure the Easy Bolus and RF control options are turned ON.

Remote Control 111

Page 123
Image 123
Energizer MMT-511 manual Installing a new remote battery