When you see a alarm message on your pump’s screen:

1.Use the button to scroll down to read ALL of the alarm text. There is often text that is not visible until you scroll down

using the button.

2.Follow the instructions in the alarm text.

3.Press ESC and then press ACT to clear the alarm.

4.Make sure all your settings (i.e., time and date) are correct.

E (Error)

After receiving this alarm, note the error number then call the 24-hour Product Help-line for assistance.

An error alarm will indicate an E followed by two numbers. The example shown uses “xx” to indicate numbers.

MiniMed

5:30A

Exx

Call help-line for assistance Check all settings Program as required ESC,ACT to clear

Off no power

The battery is dead. Replace bat- tery immediately. Follow the directions on the screen. Check to make sure that the time is correct on the screen. If not, reset the time.

4:42A

OFF

 

 

NO POWER

0% batt life Delivery Stopped Replace Batt Now Use 1 AAA alkaline ESC,ACT to clear

136Chapter 11

Page 148
Image 148
Energizer MMT-511 manual Error, Off no power