Epson P-6000 manual Removing the battery

Models: P-6000

1 113
Download 113 pages 62.86 Kb
Page 89
Image 89

R41A0K180 User’s Guide

2. Connect the AC adapter as shown below, then plug the other end into a power outlet.

*Charge lamp

The Charge lamp lights green during charging. When the battery is fully charged, the Charge lamp turns off. It takes about 3.5 hours to fully charge the battery when the power is off, more time if the viewer is in use.

Note:

The viewer stops charging if the battery becomes hot when operating it during charging. In that case, it starts charging again when it cools down.

If the Charge lamp lights orange, see "Troubleshooting" on page 91.

Removing the battery

1. Make sure that the viewer is turned off.

cRemove the AC adapter if connected.

Never remove the battery while turned on. Doing so may cause data in the card or HDD to be lost or damaged.

2.Open the battery cover.Caution:

Maintenance 89

Page 89
Image 89
Epson P-6000 manual Removing the battery