R41A0K180 User’s Guide
The data is not displayed
Cause
The photo, video, or audio file you selected is not supported.
The data is broken.
The LCD Brightness setting is too dark.
The video cable is connected to the viewer
There is too much data to display on the screen at one time
What to do
See "Photo/Video file formats supported by the viewer" on page 43 or "Audio file formats supported by the viewer" on page 76 and make sure the data is supported. Also, check the codec of the data if you are trying to display a video file. You can convert and transfer video and audio files with the Epson Link2 software.
Copy the data again.
See "Changing the Viewer Settings" on page 83 and make sure the LCD Brightness setting is set properly.
Disconnect the video cable to display the LCD.
Divide the data into multiple folders and switch to computer view. For details on switching the view mode, see "Switching the view mode" on page 47.
The color space information cannot be recognized
Cause
The color space information cannot be recognized with the viewer if you edit the image with image edit software.
What to do
Set the color space from Settings. For details, see "Changing the Viewer Settings" on page 83.
The movie is not displayed clearly or stops abruptly
Cause
The bit rate of the data is too high.
What to do
Check the bit rate. For details, see "Photo/Video file formats supported by the viewer" on page 43. You can convert and transfer video files with the Epson Link2 software.
Troubleshooting 93
