CONFIDENTIAL
Paper roll Panel button command ESC c 5
Ver. 10.0 1 p. 158
TM-L90
The panel button is FEED.
When the PAPER OUT LED flashes with executing macro function, the FEED is enabled regardless of
the setting of this command. Even if the switch is pressed, paper cannot be fed.
When the cover is open or the roll paper end sensor detects a paper end, the FEED button is
disabled regardless of the settings of this command.
TM-L60II
The panel button is PAPER FEED.
When the roll paper end sensor detects a paper end, the PAPER FEED is enabled regardless of the
settings of this command. Even if the switch is pressed, paper cannot be fed.
When the cover is open or the roll paper end sensor detects a paper end, the PAPER FEED is
disabled regardless of the settings of this command.
TM-P60
The panel button is FEED.
When the FEED button is operated to print a status sheet, the FEED button is enabled regardless of
the setting of this command. Even if the switch is pressed, paper cannot be fed.
When the cover is open, an error occurrs, or the roll paper end sensor detects a paper end, the
FEED button is disabled regardless of the settings of this command.
TM-U230
The panel button is PAPER FEED.
When you change the roll paper after the printer stops printing because of roll paper end, the
following processing is done regardless of the settings of this command.
When the printer is waiting for the roll paper to be set (the LED is off), the PAPER FEED is enabled, and
paper can be fed.
When the LED blinks to indicate that the printer is confirming the status, the PAPER FEED is enabled. Even
if the switch is pressed, paper cannot be fed.