CONFIDENTIAL
Paper roll Customize commands GS ( C
Ver. 10.0 1 p. 555
GS ( C EXECUTING + SETTING
[Name] Edit NV user memory
[Printers not featuring this command] TM-T88III, TM-L60II, TM-U230, TM-U210, TM-U300A/B
[Description] Edits the data in the NV user memory.
• Function code
fn
specifies the function.
•
pL
,
pH
specifies (
pL
+
pH
× 256) as the number of bytes after
pH
(
m
,
fn
,
b
,
[c1 c2]
,
and
[d1...dk]
).
• The other p/arameters are explained under each of the functions.
[Notes] ■The command function is defined by the function code (
fn
). The command operation differs, depending
on the function.
■The NV user memory area is especially provided for storing character data in the non-volatile memory built
into the printer.
■The NV user memory data configuration is as follows: key code + data + terminator. This unit is called a
record.
• A record is one data processing unit in the NV user memory. It is controled by a key code.
• The key code is a 2-byte ID code used to identify records and is created with parameters
c1
,
c2
in the
command. You can specify any desired character code from 32H– 7EH.
fn
Function No. Function name
0, 48 Function 0 Delete the specified record
1, 49 Function 1 Store the data in the specified record
2, 50 Function 2 Transmit the data in the specified record
3, 51 Function 3 Transmit capacity of the NV user memory currently being used
4, 52 Function 4 Transmit the remaining capacity of the NV user memory
5, 53 Function 5 Transmit the key code list
6, 54 Function 6 Delete all data in the NV user memory
Customize commands