CONFIDENTIAL
Paper roll Tw o-dimension code commands GS ( k
Ver. 10.0 1 p. 513
[Notes for processing of PDF417 symbol data (when
cn
= 48)]
■The symbol data specified by Function 080
d1...dk
is stored in the printer and is printed by the
specification of Function 081. The symbol data in the symbol storage area is reserved until the following
processing is performed:
• Function 080 or 180 or 280 is executed
•ESC @ is executed
• The printer is reset or the power is turned off
■When processing Function 081 or 082, the setting values of Functions 065 to 070 are used. If the printable
area is not large enough, the symbol may not be printed.
■Executing Function 081 after executing Function 080 repeatedly prints the same symbol data.
■By using Functions 065 to 070 combined with Function 081, the same symbol data
d1...dk
is printed
differently.
■By using Function 082, the symbol size printed by Function 081 is available.
[Notes for process of QR Code symbol (when
cn
= 49)]
■The symbol data specified by Function 180
d1...dk
is stored in the printer and is printed by the
specification of Function 181. The symbol data in the symbol storage area is reserved until the following
processing is performed:
• Function 080 or 180 or 280 is executed
•ESC @ is executed
• The printer is reset or the power is turned off
■When processing Function 181 or 182, the setting values of Functions 165, 167, 169 are used. If the
printable area is not enough, the symbol may not be printed.
■Executing Function 181 after executing Function 180 repeatedly prints the same symbol data.
■By using Functions 165, 167, 169 combined with Function 181, the same symbol data
d1...dk
is printed
differently.
■By using Function 182, the symbol size printed by Function 181 is available.