Epson GS ( E pL pH fn c1 c2 <Function 10>

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.0 1 p. 608
GS ( E pL pH fn c1 c2 <Function 10>
[Name] Delete the data for the character code page
[Format] ASCII GS ( E pL pH fn c1 c2
Hex 1D 28 45 03 00 0A c1 c2
Decimal 294069 3 010c1c2
[Range] ( pL + pH × 256) = 3 ( pL = 3, pH = 0)
fn = 10
y = 2
128 ≤ c1 ≤ d2 ≤ 255
[Description] Deletes the character pattern for the character code page in the work area.
• c1 specifies the beginning character code for the deletion, and c2 specifies the final code.
[Notes] ■This function works in user setting mode.
■Characters 80H to FFH in ASCII code can be defined.
■After deleting the character pattern, the dots are blank.
■Deletes the data of the user-defined code page that is copied into the work area by Function 7.
■If data in the user-defined code pages is not copied into the work area, this function is not available. In this
case, execute Function 7 first.
[Model-dependent variations] TM-U220
TM-U220
This printer doesn’t support this function.