Epson Paper roll Customize commands FS g 1, , Ver. 10.0 1 p. 552

CONFIDENTIAL
Paper roll Customize commands FS g 1
Ver. 10.0 1 p. 552
[Notes] ■NV user memory is the memory area used for storing character font data in non-volatile memory. The data
stored is effective until it is redefined by this command.
■In standard mode, this command is effective only when processed at the beginning of a line.
■If this command is encountered while a macro is being defined, the printer cancels macro definition and
starts processing this command. At that time, the macro becomes undefined.
■All the previously stored data in the specified area is replaced with new data.
■The NV user memory data can be read by FS g 2.
■Data is written to non-volatile memory by this function. Note the following when using these functions:
• The printer may be BUSY when storing data and will not receive any data. In this case, be sure not to
transmit data from the host.
• Excessive use of this function may destroy the non-volatile memory. As a guideline, do not use any
combination of the following commands more than 10 times per day for writing data to the non-
volatile memory: FS q, GS ( A (part of functions), GS ( C (part of functions), GS ( E (part of
functions), GS ( L / GS 8 L (part of functions), GS ( M (part of functions), GS g 0, and FS g 1.
■Note the rules below for the operating NV memory (store data / cancel data):
• Paper feeding is disabled by the paper feed button.
• The printer does not process real-time commands.
• Even if “ASB is enabled” is specified, the printer does not send ASB status.
[Model-dependent variations] None
Program Example
PRINT #1, CHR$(&H1C);”g1”;CHR$(0);
PRINT #1, CHR$(0);CHR$(0);CHR$(0);CHR$(0);CHR$(14);CHR$(0);
PRINT #1, “NVimage1=Stamp”;