CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 250
A horizontal maximum print area is decided according to the width of the paper.
TM-P60
The dot density and the maximum print area are described in the next tables (dpi: number of dots per 25.4
mm).
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles) to the
direction of paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed with the page
mode selected (for the starting position specified with ESC T is “Upper right” or “Lower left”). In this case,
graphics rotated by 90 degrees or 270 degrees are printed.
See Function 5 of GS ( E for the paper width.
Paper width When (x = 1) is specified. When (x = 2) is specified.
When paper
layout is not used
or top of black
mark is selected
80 to 78 mm 576 dot 288 dot
77 to 38 mm (256 + (paper width – 38) × 8) dot (256 + (paper width – 38)
× 8 / 2) dot
When the bottom
of label is
selected
80 mm 560 dot 280 dot
79 to 38 mm (224 + (paper width – 38) × 8) dot (224 + (paper width – 38) × 8 / 2) dot
Scaling
Horizontal Vertical
Dot
density
Maximum print area (dot)
Dot
density
Maximum print area
(dot)
Paper width
58 mm
Paper width
60 mm
× 1203 dpi 420 432 203 dpi 1200
× 2203/2 dpi 210 216 203/2 dpi 600