CONFIDENTIAL
Paper roll Miscellaneous commands DLE DC4 (fn = 7 )
Ver. 10.01 p. 392
(*2) “Battery remaining amount“ is as indicated in the following table.
• When the battery remaining amount is “L level,“ we recommend replacing or charging the
battery.
• When the battery remaining amount is “S level,“ the printer terminates printing and goes
offline.
You can confirm the battery remaining amount by looking at the “battery LED” (BAT).
When memory switch [Msw 8-2] is On, this printer beeps when it enters the “L level“ or “S level.“
When the printer power is on:
(*1) When battery remaining amount is S level, the ERROR LED is On.
Battery remaining amount Information
Hex Decimal
30H 48 Battery remaining amount: H level
31H 49 Battery remaining amount: M level
32H 50 Battery remaining amount: L level
33H 51 Battery remaining amount: S level
34H 52 Battery isn’t installed
Battery AC adapter Battery LED (BAT.) status
Installed Not installed OFF: Battery remaining amount: H
level
Blinking: Battery remaining amount:
M level
ON: Battery remaining amount: L
level or S (*1)
Installed Always Off
Not installed Installed Always Off