Epson GS ( L pL pH m fn kc1 kc2 x y <Function 69>

CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 246
GS ( L pL pH m fn kc1 kc2 x y <Function 69>
[Name] Print the specified NV graphics data.
[Format] ASCII GS ( L pLpHm fn kc1 kc2 x y
Hex 1D 28 4C 06 00 30 45 kc1 kc2 x y
Decimal 29 40 76 6 0 48 69 kc1 kc2 x y
[Range] ( pL + pH × 256) = 6 ( pL = 6, pH = 0)
m = 48
fn = 69
32 ≤ kc1 ≤ 126
32 ≤ kc2 ≤ 126
TM-L90, TM-T90,TM-P60, TM-J2000/J2100: x = 1, 2, y = 1, 2
[Description] Prints the NV graphics data defined by the key codes ( kc1 and kc2 ).
• Users have the option of specifying horizontal (times x ) × vertical (times y ) size settings for the selected
data.
[Notes] ■This function is used to print NV graphics data defined using Functions 67 and 68 of this command.
■The printer only prints when NV graphics data corresponding to the specified key code is present.
■Use this function when the printer enters the “beginning of the line” or “no data in print buffer” state
during standard mode.
■Note that during page mode, printing operations will not be performed simply because image data has
been stored to the print buffer.
■NV graphics data that exceeds the print area for one line will not be printed.
■The scales for width and height of graphics are specified by ( x , y ). Therefore, in page mode with 90° or
270° clockwise-rotated graphics, the printer applies print area and dot density from [ x : direction of paper
feed, y : perpendicular to direction of paper feed].
■Settings for text effect (bold, underline, orientation, etc. except for upside-down) and font size do not
affect the printing of the NV graphics data.
■Feeds the paper the required distance when printing graphics data, regardless of line feed pitch settings
entered using the Set line feed command.