Epson GS ( E pL pH fn x c1 c2[y d1...d(x y)] k <Function 9>

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.0 1 p. 606
GS ( E pL pH fn x c1 c2[y d1...d(x × y)] k <Function 9>
[Name] Define the data (raster format) for the character code page
[Format] ASCII GS ( E pL pH fn x c1 c2 [x d1...d(x × y)]k
Hex 1D 28 45 pL pH 08 x c1 c2 [x d1...d(x × y)]k
Decimal 294069 pL pH8 x c1 c2 [x d1...d(x × y)]k
[Range] 5 ≤ ( pL + pH × 256) ≤ 65535 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255)
fn = 9
128 ≤ c1 ≤ d2 ≤ 255
0 ≤ d ≤ 255
k = c2 – c1 + 1
[Description] Defines the character pattern (raster format) for the character code page in the work area.
• x specifies the number of bytes in the horizontal direction.
• c1 specifies the beginning character code for the definition, and c2 specifies the final code.
• y specifies the number of dots in the vertical direction from the top.
• d specifies the defined data (raster format).
• k indicates the number of the defined data. k is an explanation parameter; therefore, it does not need
to be transmitted.
[Notes] ■This function works in user setting mode.
■Characters 80H to FFH in ASCII code can be defined.
■If
y, c1, c2, or x process a value out of the definition range, processing of this function is canceled.
■Changes the data of the user-defined code page that is copied into the work area by Function 7.
Font No. (configuration)
yx
10 (9 ×17) 2 17
12 (12 × 24) 2 24
17 (8 × 16) 1 16
18 (10 × 24) 2 24