CONFIDENTIAL
Paper roll Print position commands GS $
Ver. 10.0 1 p. 183
GS $ EXECUTING COMMAND
[Name] Set absolute vertical print position in page mode
[Format] ASCII GS $
nL
nH
Hex 1D 24
nL
nH
Decimal 29 36
nL
nH
[Range] 0 ≤
nL
≤ 255, 0 ≤
nH
≤ 255
[Default] None
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] In page mode, moves the vertical print position to (
nL
+
nH
× 256) × (vertical or horizontal motion unit) from
the starting position set by ESC T.
In page mode, moves the vertical print position to [(nL + nH x 256) x (vertical or horizontal motion unit)] from
the starting position set with ESC T.
[Notes] ■This command is enabled only in page mode. If this command is processed in standard mode, it is ignored.
■The printer ignores any setting that exceeds the print area set by ESC W.
■The horizontal or vertical motion unit is used for the print direction set by ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
vertical motion unit is used.
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
horizontal motion unit is used.
■Even if the vertical or horizontal motion unit is changed after changing the print position, the print
position will not be changed.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60
See program example and print sample for GS $ and GS \.
TM-J2000/J2100
The vertical or horizontal motion unit is specified by GS P.
Print position commands