Epson manual GS H

CONFIDENTIAL
Paper roll Bar code commands GS H
Ver. 10.0 1 p. 338
GS H SETTING COMMAND
[Name] Select print position of HRI characters
[Format] ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
[Range] 0 ≤ n ≤ 3
48 ≤ n ≤ 51
[Default] n = 0
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Selects the print position of Human Readable Interpretation (HRI) characters when printing a bar code, using
n as follows:
[Notes] ■HRI characters are printed using the font specified by GS f.
■This command setting is effective until performing of ESC @, reset or power-off.
n Print position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code
Bar code commands