CONFIDENTIAL
Paper roll Miscellaneous commands ESC =
Ver. 10.0 1 p. 408
ESC = SETTING COMMAND
[Name] Select peripheral device
[Format] ASCII ESC =
n
Hex 1B 3D
n
Decimal 27 61
n
[Range] 1 ≤
n
≤ 3
[Default] TM-J2000/J2100: Serial interface model:
n
= 1 When [memory switch [DM-D (customer display) connection] is OFF.
n
= 2 When [memory switch [DM-D (customer display) connection] is ON.
Parallel interface model:
n
= 1
TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60, TM-U230, TM-U220, TM-U210:
n
= 1
[Printers not featuring this command] TM-U300A/B
[Default] Selects the device to which the host computer transmits data, using
n
as follows:
[Notes] ■When the printer is disabled, it ignores all received data and commands with the exception of ESC = and
real-time commands.
■If ASB is enabled when the printer is disabled by this command, the printer transmits the ASB status
message whenever the status changes. See the description of GS a for ASB function.
■Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned
off.
■The default value when the power supply is turned on and when ESC @ is executed might be different.
• The default value when the power supply is turned on becomes the [default value].
n
Function
1,3 Enables printer.
2 Disables printer.
Miscellaneous commands