CONFIDENTIAL
Paper roll Kanji commands FS –
Ver. 10.0 1 p. 495
FS – SETTING COMMAND
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS –
n
Hex 1C 2D
n
Decimal 28 45
n
[Printers not featuring this command] TM-L60II, TM-P60
[Range] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90: 0 ≤
n
≤ 2, 48 ≤
n
≤ 50
TM-U220, TM-U230: n = 0, 1, 48, 49
TM-U210, TM-U300A/B:
n
= 0, 1
[Default]
n
= 0
[Description] Turns on or off underline mode for multi-byte code character (Kanji-underline), using
n
as follows:
[Notes] ■Settings of this command affect multilingual (except Thai) characters and user-defined characters.
■Even if Kanji underline mode is specified, 90° clockwise-rotation characters, white/black reverse characters,
and spaces skipped by HT, ESC $, or ESC \ are not underlined.
■When a character size is changed, an underline width is not changed.
■When underline mode is canceled, the following characters are not underlined; however, an underline
width set right before the mode is canceled remains.
■Settings of this command are effective until FS ! is executed, ESC @ is executed, the printer is reset, or the
power is turned off.
■Some printer models support Kanji underline mode with 2-dot width.
n
Function
0, 48 Turns off Kanji-underline mode
1, 49 Turns on Kanji-underline mode (1-dot thick)
2, 50 Turns on Kanji-underline mode (2-dots thick)
Kanji commands