Chapter 3

Note: Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD material.

3.Use the W (Back) and X (Forward) keys to toggle between OUTPUT ONE and TWO.

4.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.8.1.25.1.2 Output 3

To edit the output types for output 3 (dependent on model and option licences obtained), press the X (Forward) key. The following screen is displayed and the Edit key is lit:

OUTPUT

OUTPUT THREE : SD-SDI
5.1.2To edit the output 3 type:

1.Press the Edit key. The cursor appears at the start of the current option.

2.Using the S (Up) and T (Down) keys toggle between the available options: ASI, SD-SDI, AUTO and HD-SDI (depending on model and option licences obtained).

Note: Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD material.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

Press the W (Back) key to return to the Output Selection menu.

3.5.8.25.2 TS Feed Selection

To edit the Transport Stream (TS) Feed Selection, press the T (Down) key. The following screen is displayed and the Edit key is lit:

OUTPUT

TS FEED SELECTION
5.2 Descrambled

Selecting the Descrambled option will provide a Transport Stream that is post descramble block. Selecting the Input option will provide a Transport Stream that is before the descramble block.

To edit the TS feed selection:

1.Press the Edit key. The cursor appears at the start of the current option.

2.Using the S (Up) and T (Down) keys to toggle between the Descrambled and Input options.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

EN/LZT 790 0005 R1A

3-57