Chapter 6
The output bit rate, which is selected by the user, may be constant (by inserting NULL packets) or variable (plus the increment due to the PSI SI insertion).
6.2.11Multi-Service Filtering (RX8XXX/SWO/MULTI/SERVFILT)
This option is available for the RX8200, 8310, 8315, 8320 and 8330 Receivers.
This option enables the filtering of services within a Multiple Program Transport Stream (MPTS) and provides a single CBR MPTS output.
This feature generates a custom MPTS by filtering services from a source MPTS. This service may be initiated by selecting the Output tab from the web browser then selecting Filter Mode>MULTI SERVICE. This enables the FILTER column of the Serviceplus table. From this page, the user is able to select up to 22 services to be filtered. All components of the selected service will be filtered and presented at the output MPTS.
The output bit rate, which is selected by the user, may be constant (by inserting NULL packets) or variable (plus the increment due to the PSI SI insertion).
In Constant mode, if overrate protection is ticked the unit will not clip any services which ‘over rate’ the selected bit rate. The unit also has the option to insert nulls on failure. Both of these functions are available from the Output tab of the web control.
6.2.12High-Speed Data Output (RX8XXX/SWO/IP/DATA)
This option is available for the RX8200, 8310, 8315 and 8330 Receivers.
This option enables
6.2.13Password Protection of Web Browser (RX8XXX/SWO/PW)
This option is available for the RX8200, 8310, 8315, 8320 and 8330 Receivers.
This option protects the web browser from malicious or accidental changes, only allowing access via a windows username and password screen.
Note: Default username = username. Default password = password.
6.2.14IP Transport Stream Output (RX8XXX/SWO/IP/OUT)
This option is only available for the RX8320 ATSC Receiver.
This option enables the IP transport stream output and encapsulation of the transport stream into multicast. There are two Gigabit Ethernet
EN/LZT 790 0005 R1A |