Ericsson RX8000 dBm, Edit, Save, Edit, STATUS, STATUS, STATUS, |STATUS, UNLOCKED, |RF Input, |FEC RATE, |C/N ---dB, |MODULATION, |LOCK STATUS, MARGIN ---dB, |ERROR RATIO

Chapter 3

3.5.2.22.2 Select Satellite Input

This menu allows the choice of up to four RF Inputs. To access this menu, press the T (Down) key. The following screen is displayed:

S2	SELECT SATELLITE INPUT
2.2	RF Input 01	>

To select the relevant RF Input:

1.Press the Edit key. The cursor appears below the input number.

2.Use the S (Up) and T (Down) keys to toggle between input options 01-04 (dependent on model and option licences obtained).

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.2.2.12.2.1 Status

To access the S2 Status menu, press the X (Forward) key. The following screen is displayed:

S2	STATUS
2.2.1		>

3.5.2.2.1.12.2.1.1 Lock Status

To view the Status of the various equipment inputs, press the X (Forward) key. The following screen is displayed:

STATUS	LOCK STATUS	UNLOCKED
2.2.1.1	C/N --- dB	MARGIN --- dB

3.5.2.2.1.22.2.1.2 Status - Error Ratio/Signal Level

To view the status of these parameters, press the T (Down) key. The following screen is displayed:

STATUS	ERROR RATIO	---
2.2.1.2	SIGNAL LEVEL	---	dBm

3.5.2.2.1.32.2.1.3 Status - Modulation/FEC Rate

To view the status of these parameters, press the T (Down) key. The following screen is displayed:

STATUS	MODULATION	---
2.2.1.3	FEC RATE	-/--

EN/LZT 790 0005 R1A 3-17