2.7.7AUDIO/AUDIO OUT Connector
All units provide a pair of connectors supplying two stereo channels. Each carries a single channel stereo pair in both analogue and balanced digital form.
Table 2.8 AUDIO/AUDIO OUT Connectors
Item | Specification |
|
|
Connector type | |
|
|
Connector designations | AUDIO OUT 1 |
| AUDIO OUT 2 |
| AUDIO 3 (RX8200 only) |
| AUDIO 4 (RX8200 only) |
|
|
Pin 1 – Digital audio + | |
| |
| Pin 2 – Ground |
| Pin 3 – Left + |
| Pin 4 – Right + |
| Pin 5 – Ground |
| Pin 6 – Digital audio – |
| Pin 7 – Ground |
| Pin 8 – Left – |
| Pin 9 – Right – |
|
|
Nominal output impedance | 50 Ω |
|
|
Maximum data rate | 3.072 Mbps |
|
|
Analogue Output level | +20 dBm nominal clipping |
| level. Selectable in range 12 |
| to +24 dBm. |
|
|
Load impedance | ≥600 Ω balanced |
|
|
2.7.8ETHERNET/CONTROL Connector
All units provide two Ethernet remote control interfaces for Web Browser Control.
Table 2.9 ETHERNET/CONTROL Connectors
Item | Specification | |
|
| |
Connector type | ||
|
| |
Connector designation | ETHERNET 1 or CONTROL 1 | |
| ETHERNET 2 or CONTROL 2 | |
|
|
|
Pin 1 | – Tx Out (+) | |
(Unused pins not | Pin 2 | – Tx Out |
connected) | Pin 3 | – Rx In (+) |
| Pin 6 | – Rx In |
|
|
|
Chapter 2
AUDIO/AUDIO OUT
ETHERNET/CONTROL
EN/LZT 790 0005 R1A |