Chapter 5
•Mcast IP Address 1/2 – allows the user to set the Multicast IP Address for the primary stream on Port 1/2.
•Source IP Address 1/2 – allows the user to set the Source IP Address for the primary stream on Port 1/2.
•UDP Port 1/2 – allows the user to set the UDP Port Address for the primary stream on Port 1/2.
•Column Port 1/2 – allows the user to set the Column Port Address for the primary stream on Port 1/2.
•Row Port 1/2 – allows the user to set the Row Port Address for the primary stream on Port 1/2.
•
•Unicast Enable 1/2 – allows the user to enable Unicast for Port 1/2.
•Use Input Ports – allows the user to select the appropriate input port.
•Auto Revert Delay – allows the user to enter a value in seconds.
Two buttons, Clear ARP 1 and Clear ARP 2, are provided to allow the user to clear the ARP cache for port 1 or 2. If these are selected the following window is displayed:
Figure 5.21Clear Arp Confirmation Window
If OK is selected, the Input>I/P Input page is displayed showing that the operation has been successful.
EN/LZT 790 0005 R1A |