Chapter 1

The Decoder is configured to select a single video Service and other audio/data components from the multiple Services on the incoming Transport Stream and present them at the output.

Figure 1.4 Role of the Decoder

Note: G.703 input may also be used to interface to telco infrastructure.

1.5Construction

The RX8000 Receiver is constructed using a screened self-ventilated modular system. All operational inputs and outputs are via rear-panel connectors. The unit may be operated freestanding or mounted in a 19-inch rack.

1.6Front Panel

The user interface for the Front Panel consists of an alphanumeric Liquid Crystal Display, pushbuttons, and a status LED that are used to set-up, control and monitor the unit.

Various menu screens can be navigated on the LCD using the pushbuttons, which allow you to select and modify key parameters and features of the unit.

Full details of the front panel menus and information on the use of these controls is given in Chapter 3, Front Panel Control.

1-20

EN/LZT 790 0005 R1A