Chapter 5

Figure 5.11 Alarms Web Page

The contents of this page are composed mainly of fields with drop-down menus which allow the setting or masking of various alarms and check boxes which can be used to activate relay mapping. Two of the alarm fields, namely C/N (Carrier-to- Noise) Margin and Over Temperature also have associated entry fields which allow the user to enter a value which, if exceeded, will activate the alarm.

Setting an alarm enables the alarm to be shown on the alarm LED, the alarm status displays and is recorded in the alarm log.

Any changes which are made to the alarm settings shown may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from the current values of the equipment.

5.2.4Customization

The Customization web page allows the user to view which licenses are enabled on the equipment and to enable further licenses as purchased by entering the custom key provided.

To view this page, select the Customization tab from the top of the current web page.

Figure 5.12Customization Web Page

5-12

EN/LZT 790 0005 R1A