Annex B
B.4.3 |
|
|
| Table B.16: | |
|
|
|
| Input | Specification |
|
|
|
| Safety status | SELV |
|
|
|
| Connector type | BNC, Female |
|
|
|
| Input impedance | 75 Ω |
|
|
|
| Data rate range | 0.350 - 160 Mbps |
|
|
|
| Error decoding | None |
|
|
|
B.4.4 | 100/1000BaseT Dual NIC Input Receivers | |
| Table B.17 100/1000BaseT IP Dual NIC Input Specifications | |
|
|
|
| Input | Specification |
|
|
|
| Safety status | SELV |
|
|
|
| Connector type | 8 way |
|
|
|
| Connector | 100/1000 BT |
| Designation |
|
|
|
|
| Signal Type | 100/1000BaseT Ethernet (IEEE 802.3/802.3u) Full Duplex mode |
|
|
|
| Data Rate | 1.5 – 216 Mbps |
|
|
|
| TS | CBR MPTS/SPTS feeds |
|
|
|
| Error correction | |
|
|
|
B.4.5 Frame Sync Connector
The receiver can frame lock to an external video source. The frame information is input as a composite synchronous signal, with or without active video. The user can offset the sync to the video output by ±32,000 HD pixels, with a resolution of one pixel.
It is possible to connect multiple receivers to the same reference signal. This input requires an external 75 Ω termination.
EN/LZT 790 0005 R1A |