Ericsson RX8000 Edit, Edit, Save, Edit, Edit, STATUS, STATUS, |STANDARD, |FRAME SIZE, |(UNLOCKED), |PILOT SYMBOLS, |00000.000 MHz, |SPECTRAL SENSE

Chapter 3

3.5.2.2.1.4 2.2.1.4 Standard/Spectral Sense

To view the status of these parameters, press the T (Down) key. The following screen is displayed:

		STATUS	STANDARD	---
		2.2.1.4	SPECTRAL SENSE	---
3.5.2.2.1.5	2.2.1.5 Pilot Symbols/Frame Size
	To view the status of these parameters, press the T (Down) key. The following
	screen is displayed:
		STATUS	PILOT SYMBOLS	---
		2.2.1.5	FRAME SIZE	---

Press the W (Back) key to return to the S2 Status menu.

3.5.2.2.22.2.2 Source 1 Configure

This menu allows access to and configuration of various Source 1 Input 1 parameters. To access this function, press the T (Down) key. The following screen is displayed:

SOURCE 1 CONFIGURE Input 1 (L-band)
2.2.2	(UNLOCKED)	>

3.5.2.2.2.12.2.2.1 LNB LO Frequency

To view and edit the current settings of the Source 1 Low Noise Block (LNB) Local Oscillator (LO) Frequency, press the X (Forward) key. The following screen is displayed and the Edit key is lit:

SOURCE 1 LNB LO FREQUENCY
2.2.2.1	00000.000 MHz	(UNLOCKED)

To edit the LNB LO frequency setting:

1.Press the Edit key. The cursor appears below the first number.

2.Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.2.2.2.22.2.2.2 Satellite Frequency

To view and edit the current settings of the Source 1 Satellite Frequency, press the T (Down) key. The following screen is displayed and the Edit key is lit:

3-18 EN/LZT 790 0005 R1A