Chapter 3

6.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

To edit the user STD:

1.Press the Edit key. The cursor appears below the first character of the current STD selection.

2.Use the S (Up) and T (Down) keys to toggle between the MPEG-4 AVC and MPEG-2 options.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.6.2.33.2.3 Delay Mode

To view and edit the Delay Mode, press the T (Down) key. The following screen is displayed and the Edit key is lit:

VIDEO

DELAY MODE: STANDARD

3.2.3To edit the Delay Mode:

1.Press the Edit key. The cursor appears below the first character of the current selection.

2.Use the S (Up) and T (Down) keys to toggle between the STANDARD and LOW (this option is only available if RX8XXX/SWO/LDELAY is enabled) options.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.6.2.43.2.4 RX Delay

To view and edit the RX Delay, press the T (Down) key. The following screen is displayed and the Edit key is lit:

VIDEO

RX DELAY 4:2:0: 000

3.2.4

This screen shows the extra delay added (in milliseconds) on top of the standard or low delay selected in screen 3.2.3 Delay Mode, above.

To edit the RX delay:

1.Press the Edit key. The cursor appears below the first character of the current value.

2.Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit.

EN/LZT 790 0005 R1A

3-49