Chapter 5

5.2.14SNMP

This page gives access to the Simple Network Management Protocol (SNMP) parameters for the receiver. To view this page, select the SNMP Tab from the current web page.

Figure 5.35SNMP Web Page

The following user-editable fields are displayed on this page:

•Version - allows selection of the SNMP version from a drop-down menu.

•Sys Services – allows input of a value for MIB-2 services that this device primarily offers (MIB-II RFC1213). See MIB-2 for definition.

•System Name – allows input of a MIB-2 sys name, which should be an administratively-assigned name.

•Trap Community – allows input of type of trap community.

•Read Write Community - allows input of type of read write community.

•Read Only Community – allows input of type of read only community.

•Location – allows input of a MIB sys location which is the physical location of this node.

•Description – allows input of a MIB sys description which should be a textual description of the entity.

•Contact – allows input of a MIB sys contact which should be a textual identification of the person to be contacted.

Any changes which are made to the SNMP page may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from the current values of the equipment.

5-38

EN/LZT 790 0005 R1A