Chapter 3
2.Use the S (Up) and T (Down) keys to toggle between OFF and ON.
3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.
To return to the System menu, press the W (Back) key twice.
3.5.22 Input (Satellite Input Card RX8200/HWO/DVBS2)
The Input menu is used to select the various inputs to the equipment and set input parameters. To access the Input menu from the System menu, press the T (Down) key. The following screen is displayed:
INPUT | UNLOCKED |
| INPUT: ASI |
2 | Mbits/s | ||
|
|
|
|
3.5.2.12.1 Select/Primary Input
To access this function, press the X (Forward) key. The following screen is displayed:
INPUT | SELECT INPUT ASI |
2.1PRIMARY INPUT ASI
The X (Forward) and W (Back) keys are used to choose the Select and Primary input types.
To choose the Select input type:
1.Press the Edit key. The cursor appears below the displayed type (ASI shown above).
2.Use the S (Up) and T (Down) keys to toggle between the available types: ASI, SAT and AUTO (dependent on model and option licences obtained).
3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.
To choose the Primary input:
1.Move to the Primary Input function using the X (Forward) key
2.Press the Edit key. The cursor appears below the displayed type (ASI shown above).
3.Use the S (Up) and T (Down) keys to toggle between the available types: ASI and SAT (dependent on model and option licences obtained).
4.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.
EN/LZT 790 0005 R1A |